Archive for the ‘Nitro RC cars’ Category

nitro-rustler

The power of the TRX® 2.5 Racing Engine pushes the Nitro Rustler to the limits! With insane top speeds of 47+mph, blowing away everything else in its class is a breeze! Simple clutch bell change pushes it past 50mph! Now this is where it gets really wicked!

Excellent weight distribution and precisely engineered suspension geometry give the Nitro Rustler the handling prowess you need to take control on the track.

Rustler sports a stunning 6-color ProGraphix® body and decal set. At the corners you’ll find a set of bold 2.8″ mirror-chrome All-Star™ wheels wrapped with performance-engineered tires, pre-glued, of course. The precision-engineered tread patterns and rubber compounds were designed to meet the performance requirements of the 65+mph Traxxas Jato (Nitro) so they are sure to provide Rustler with excellent traction. Alias™ step-pins at the rear and sharp-edged Alias ribbed tires up front hug the corners for a solid, planted feel. The wild graphics on the included ProGraphix® painted body and the sparkling TRX® Pro-Star™ chrome wheels show off with style. Starting the TRX 2.5 Racing Engine is a snap with Traxxas’ exclusive EZ-Start® push-button starter.

Only Traxxas Rustler could put this kind of performance, innovation, and overall value into a Ready-To-Race package that delivers the satisfaction you expect from a high-performance electric stadium truck. Speed, durability, and stunning looks are what make the Rustler a cut above the rest. Traxxas’ forward thinking and “no-nonsense” approach brings you the most performance for your R/C investment (woohooo!). Whether you’re at the park or on the track, the Rustler delivers sophisticated performance and handling that makes the race track anywhere you want to drive. gdxvmkyct5


Get your own fully customized Traxxas Rustler that reaches 50+ MPH in a flash!

Advertisements

RC car Servo

Futaba Servo

The rc car servo is a small mechanical motor with decide the speed and direction the car will travel.
A gas car has two servos, one connected to the carburetor, another to the steering mechanism.
The servo connected to the carburetor controls the speed of the car. It also controls the braking mechanism.
The second servo is connected to the steering mechanism, controlling the direction of the car’s front wheels.
As for doing servo motor repairs, it would be advisable to consult an expert.

RC car Frequency Crystals

Frequency Crystals

The transmitter sends signals to the receiver on a specific frequency. Removable frequency crystals, located at both the transmitter and receiver, determine this frequency.

An rc crystal mhz may be in the works in the near future.

Tip:
Be careful, the crystal with an Rx label is used for the receiver, and the Tx label for the transmitter. The purpose of these frequency crystals is to ensure that signals from car do not interfere with signals for another car. For example, if you are using a frequency of 27.255, make sure no one nearby is using the same frequency.

Operating two cars next to each other using the same frequency will cause loss of
control and cause the cars to crash. Make sure that the people you play with are on a
different frequency than what you are using.

Radio Control System

In hobby quality RC cars, the radio control system is fully proportional. This means that the speed of the car can be finely controlled. You can go at 0% to 100% full speed, and any speed in between, just like a real car. The same goes for steering the car. You can turn left gently, or turn left aggressively. You can turn right gently, or turn right aggressively. Radio control parts that are installed inside a nitro RC car:

Radio Control System

1. Receiver

2. Fail safe

3. Servo for carburetor and brakes

4. Servo for steering

5. Receiver batteries

6. On/off switch